PUSH-CONNECT TUBE FITTINGS
NOT APPROVED FOR DOT USE
QUICK CONNECT, SIMPLY PUSH TUBING IN, NO TOOLS, SAVES UP TO 75% OF ASSEMBLY TIME OF STANDARD
COMPRESSION FITTINGS.  QUICK DISCONNECT, HOLD 2 FINGERS ON INSERT AND PULL TUBING OUT,
NO TOOLS REQUIRED.  POSITIVE SEAL. NO LEAKS.  AFTER TUBING IS INSERTED, SEAL IS MADE.
BUNA-N  O-RINGS STANDARD.  BRASS CONSTRUCTION.  ELBOWS AND TEES ARE FORGED BRASS.
WORKING PRESSURE:  THE FITTING IS SUITABLE FOR UP TO THE MAXIMUM
WORKING PRESSURE OF THE PLASTIC TUBING USED.
FOR SOFT COPPER TUBE, A MAXIMUM WORKING PRESSURE OF 750 PSI IS RECOMMENDED. 
 ALSO SUITABLE FOR VACUUM SERVICE.  WORKING TEMPERATURE:  -10o F TO 200o F.
SWIVEL MALE ELBOW UNION UNION TEE
Tube Male Pipe Tube Tube
Part No. O.D. Thread Part No. O.D. Part No. O.D.
1169X2S 1/8 1/8 1162X2 1/8 1164X2 1/8
1169X4S 1/4 1/8 1162X4 1/4 1164X4 1/4
1169X4X4S 1/4 1/4 1162X6 3/8 1164X6 3/8
1169X4X6S 1/4 3/8 1162X8 1/2 1164X8 1/2
1169X6S 3/8 1/4
1169X6X6S 3/8 3/8
1169X8S 1/2 3/8
1169X8X8S 1/2 1/2
MALE CONNECTOR MALE BRANCH TEE SWIVEL
Tube Male Pipe Tube Male Pipe
Part No. O.D. Thread Part No. O.D. Thread
1168X2 1/8 1/8 1172X2S 1/8 1/8
1168X4 1/4 1/8 1172X4S 1/4 1/8
1168X4X4 1/4 1/4 1172X4X4S 1/4 1/4
1168X4X6 1/4 3/8 1172X6S 3/8 1/4
1168X6X2 3/8 1/8 1172X6X6S 3/8 3/8
1168X6 3/8 1/4 1172X8S 1/2 3/8
1168X6X6 3/8 3/8 1172X8X8S 1/2 1/2
1168X6X8 3/8 1/2
768-84 1/2 1/4
1168X8 1/2 3/8
1168X8X8 1/2 1/2